HSM HSM FA 400.2 Operating Manual

11, 0702 11 FA 400.2 Greasing the drive chains and cogs (twice yearly) • Switch off the shredder. • Pull out the power plug. • Remove the tray and the cover panels. • Grease the cogs and the drive chains from the motor to the cutting apparatus, the cut- ting block to the…

20, 20 0702 FA 400.2 Declaration of Conformity Machinery directive 98 / 37 / EG EMC directive 89 / 336 / EWG Low voltage directive 73 / 23 / EWG The manufacturer HSM GmbH + Co. KG, Bahnhofstrasse 115, D-88682 Salem declares herewith, that the paper shredder (Solo machine) HSM FA 4…

13, 0702 13 FA 400.2 12. Electric wiring diagrams 400 V / Solo Legend: =AV: Shredder +S: in switch cabinet +MA: on machine +BF: Keypad Solo 400 V / 50 Hz …

3, HSM HSM FA 400.2 0702 3 FA 400.2 Danger of injury Do not reach into the paper feed opening. Splinters can cause injury Before destroying credit cards and store cards, CD-ROMs or fl oppy disks, you must fi t a splinter guard (strip curtain, order no. 1.513.050.445). Danger of injury during …

9, 0702 9 FA 400.2 8. Malfunctions Check the following before calling customer service: • Is the power plug connected? • Is the shredder switched on? • Is the front door closed? • Is the waste bag full? • Is there a paper jam in the shredder? • Has the motor been overloaded? Paper…

10, 10 0702 FA 400.2 Note: Do not tighten the chain too much, as this will cause premature wear on the chain and bearings. 9. Maintenance and care Cleaning the cutting block Strip cut machines: (1 x daily) • Switch off the shredder. • Squirt special cutting apparatus oil through…