IMC Networks PD-Switch Operation Manual

2, IMC Networks PD-Switch i FCC Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B computing device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the…

5, 2 Installing the PD-Switch The PD-Switch is ready to use. Simply connect the appropriate data cables to ports 2 and up. Then connect the powered Ethernet cable to Port 1 (PD). Wall-Mount Installation The PD-Switch includes two X-shaped wall-mount holes in the enclosure. These…

6, 3 Port LEDs The ports on the PD-Switch include diagnostic LEDs that indicate unique information about the port functionality and status. PD-Switch-TX/5 For all units with 5 copper ports, the two LEDs associated with each twisted pair port are defined as follows: PD-…

8, 5 Applications In the following example, PD-Switches have been connected to a central (PoE) PSE- Switch, extending the range of the network and increasing port density. One PD-Switch uses the standard four RJ-45 ports to connect to the network, while the other two use the fiber and SFP confi…

11, 8 Safety Certifications UL/CUL: Listed to Safety of Information Technology Equipment, including Electrical Business Equipment. CE: The products described herein comply with the Council Directive on Electromagnetic Compatibility (89/336/EEC) and the Council Directive on El…