Infiniti M35 Owner's Manual

145, Switching procedure: Push the LOCK q 1 and UNLOCK q 2 buttons on the Intelligent Key si- multaneously for more than 2 seconds to switch the mode from one to the other. When pushing the buttons to set the haz- ard indicator mode, the hazard indicator flashes 3 times. When pushing the buttons…

99, slightly. However, the color and bright- ness will soon stabilize. O The life of xenon headlights will be shortened by frequent on-off opera- tion. It is generally desirable not to turn off the headlights for short inter- vals (for example, when the vehicle stops at a traffic signal). E…

372, Infiniti M35 Use the following steps to mount the li- cense plate: Before mounting the license plate, con- firm that the following parts are enclosed in the plastic bag. Only use the recommended mounting po- sition or Intelligent Cruise Control (ICC) sensor obstruction (if so equipped) may resul…

388, T Tachometer........................................................ 2-5 Temperature gauge, Engine coolant temperature gauge ............................................ 2-6 Theft (INFINITI Vehicle Immobilizer System), Engine start..................................................... …

211, PLAYING A DIGITAL VERSATILE DISC (DVD) DISC button Park the vehicle in a safe location for the front seat occupants to operate the DVD drive while watching the images. Push the “DISC” button on the instrument panel and turn the display to the DVD mode. When a DVD is loaded, it will be …

80, When the ignition switch is pushed to the ON position, the compass display q B will indicate the direction of the vehicle’s heading. If the display reads “C”, calibrate the compass by driving the vehicle in 3 com- plete circles at less than 5 MPH (8 km/h). You can also calibrate th…