La Crosse WS-8248 Instruction Manual

4, 2. Press and release the + key to select DST ON or OFF. 3. Press and release the SET key to confirm the DST setting and continue to the Radio-controlled time setting. Note: The DST default is “ON”, meaning that the WWVB will automatically change the time a…

1, La Crosse WS-8248 WS-8248 ATOMIC CLOCK WITH INDOOR TEMP/HUMIDITY AND OUTDOOR TEMPERATURE Instruction Manual FEATURES: ATOMIC CLOCK: • WWVB Radio controlled time with manual time setting • Time display: hour, minute, second • Alarm setting with snooze function • Compl…

3, If the atomic clock has already successfully received the WWVB time signal and displays the correct time and date, then the Manual settings can be skipped. After completion of the above described procedures in “Setting up” the manual setting modes can be entered by pressing and hold…

11, This warranty gives you specific legal rights. You may also have other rights specific to your State. Some States do no allow the exclusion of consequential or incidental damages therefore the above exclusion of limitation may not apply to you. For warranty work, technical support, o…

2, Alkaline batteries are recommended for use in both units. Avoid using rechargable batteries. NOTE: Do not set the clock until the outdoor temperature is displayed. 1. Place batteries in the outdoor transmitter first, then into the atomic clock. DO NOT PRESS ANY BUTTONS FOR …

9, 3) Be sure the atomic clock is at least 6 feet (2 meters) from any electrical devices, i.e. TV sets, computers, or other radio controlled clocks. 4) Remove batteries for five minutes, reinsert and leave the unit alone overnight without pressing any keys. Problem: Hour is incorrect (mi…