Lab.gruppen FP14000 Operation Manual

32, 32 FP+ Series Operation Manual 8 APPENDIX FP 4000 Level Load Rated power Line Current *2) Watt *1) Thermal Dissipation 120 VAC 230 VAC In Out Dissipated BTU/hr kCal/hr Standby with remote power off via Nomadlink ® 0.1 0.2 0 0 1 0 Power on, Idling 0.8 87 0 87 298 75 Amp (I) Watt Pin…

4, 4 FP+ Series Operation Manual This equipment conforms to the requirements of the EMC Directive 2004/108/EC and the requirements of the Low Voltage Directive 2006/95/EC. Standards applied: EMC Emission EN55103-1, E3 EMC Immunity EN55103-2, E3, with S/N below 1% at normal operation level.…

37, Lab.gruppen FP14000 Lab.gruppen ab ▸ Sweden internationaL contact ▸ [email protected] uS & canada contact ▸ [email protected] www.labgruppen.com …

15, FP+ Series Operation Manual 15 Overall amplier input gain is adjusted using the input stage DIP-switches. Please note that the gain setting is global, affecting all channels. Following the input stage, the dedicated level control on each channel allows signal attenuation from 0 dB to m…

10, 10 FP+ Series Operation Manual 6 QUICK GUIDE OVERVIEW The amplier’s front panel presents the performance and fault condition indicators, power and remote switches, and a removable dust-lter cover. Level potentiometers provide individual attenuation for the amplier channels. Ra…

35, FP+ Series Operation Manual 35 TECHNICAL SPECIFICATIONS 9 Following are the FP+ Series technical specications. These gures are accurate at the time of printing but please note that all gures are subject to change without notice. For the most accurate and current information ava…