Lantronix MatchPort b/g Pro Command Reference Manual

142, 5: Commands and Levels MatchPort® b/g Pro Embedded Device Server Command Reference 142 no queue name Removes the queue name. no soj text Removes the start-of-job string. ppp <line> Enters the serial line PPP level. queue name <text> Sets the name of t…

118, 5: Commands and Levels MatchPort® b/g Pro Embedded Device Server Command Reference 118 protocol tcp aes Uses TCP protocol with AES encryption for connect mode tunneling. protocol telnet Uses Telnet protocol (with IAC) for connect mode tunnel- ing. protocol udp Uses UDP prot…

34, 4: Configuration Using XML MatchPort® b/g Pro Embedded Device Server Command Reference 34 ethernet driver (Within group “buffer pool”.) buffer headers total free used max used cluster pool cluster size total free used max used filesystem filesystem size available space clean space dirty space …

139, 5: Commands and Levels MatchPort® b/g Pro Embedded Device Server Command Reference 139 reassert Asserts line status with current configured values. show Displays the current status. show command mode Shows the command mode settings for the current line. show history Displays the…

9, MatchPort® b/g Pro Embedded Device Server Command Reference 9 3: Command Line Interface This chapter describes accessing the MatchPort® b/g Pro embedded device server by using Telnet, SSH, or serial ports to configure the MatchPort, navigating the Command Line Interface (CLI), typing k…

81, Lantronix MatchPort b/g Pro 5: Commands and Levels MatchPort® b/g Pro Embedded Device Server Command Reference 81 exit Exits to the next higher level. no address Removes the remote host address used to establish tun- neling connections. no aes decrypt key Removes the connect tunnel AES decrypt key. no…