Lathem 2121 Operation & User’s Manual

14, Model 2121 Time Recorder User’s Guide Page 12 Change the Motor 1. Unplug the unit from the AC electrical outlet. 2. Remove cover as described in Unlock and Remove the Cover. 3. Remove type section as described in Changing the Type Section. 4. Disconnect the wire leads by turnin…

6, Lathem 2121 Model 2121 Time Recorder User’s Guide Page 4 3.2 While pushing the lock lever down, lift the entire type section as shown below until it locks into place horizontally. It will click distinctly when it locks place. 4. Set the Printed Day and Time 4.1 Locate and press the red overthro…

13, Model 2121 Time Recorder User’s Guide Page 11 Change the Type Section If the type section needs servicing, you can easily remove and change it without sending the entire unit for service. 1. Remove cover as described in Unlock and Remove the Cover. 2. Remove the type section retainin…

8, Model 2121 Time Recorder User’s Guide Page 6 4.3 When finished, release the red overthrow lever by gently pulling it toward you until it clicks. This prevents the print wheels from being manually turned. 5. Set Hands on Clock Face 5.1 Locate the setting wheel on the right side…

15, Model 2121 Time Recorder User’s Guide Page 13 8. Install the new motor making sure the motor bracket is completely behind the clock frame and the gold motor bearing is resting in the slot of the frame. 9. Attach the type section, reset the time, and replace the cover, as described in…

2, Contents Thank you for choosing the Lathem 2121 time recorder. Should you ever need assistance, please let us know. This guide contains all the information you need for setting up and operating your new time recorder. Service information is also included for replacing certain parts. O…