Lexmark Dot Matrix Manual 

32, Installing plug-ins # /usr/lexprint/bin/plugin_manager -i plugin_file Listing installed plug-ins # /usr/lexprint/bin/plugin_manager -l Removing plug-ins # /usr/lexprint/bin/plugin_manager -r plugin_name 32 …

46, Lexmark Dot Matrix print queue A “staging area” used to store print jobs, to be fed to a predefined printer or pool of printers. The place in the server where print jobs are stored for printing. Print Queue Name The name given by the administrator to the print queue when it is created. It is used by th…

15, Performing tasks Opening the printer driver The printer driver is available from a Windows menu item, or from the command line by typing: # lexprint The program has two modes: User and Administrative. If an administrator starts the program, it opens in administrative mode by default. However, if…

30, Notes: • You cannot modify a virtual device from the command line. • You cannot change a virtual device type after creation. If you need to do this, delete the existing device and then re-create it. Removing a virtual device 1 Click Device Manager. 2 Select the virtual devices you want to remov…

37, If you are using a Sun Solaris SPARC system – Check to see if the parallel device is a bpp type. If it is, make sure bpp device is selected. If it is not, make sure bpp device is not selected. – Try using the Print utilities to print directly to the printer. Example: send_paral…

38, – If TCP/IP is enabled, check the IP address, netmask, and gateway to make sure they are correct – Make sure bridges and routers are functioning properly. – Make sure all the physical connections between the print server, the printer, and the network are working. • If the printer is conne…