Lexmark C520 Reference Manual

10, Menu Groups 10 Using printer menus Paper Size/Type Note: Only installed media sources are displayed. These menu items are used to set the size and type of media loaded into a source, such as a tray, the multipurpose feeder, or the manual feed slot. Setting the size and type is a two-step p…

37, Menu Groups 37 Using printer menus PS SmartSwitch Configures the printer so it automatically switches to PostScript emulation when a print job received through the parallel port requires it, regardless of the default printer language. *On Printer examines data on the parallel i…

18, Menu Groups 18 Using printer menus Print Recovery Specifies whether the printer continues from certain offline situations, reprints jammed pages, or waits until the entire page is processed and ready to be printed. Auto Continue: *Disabled 5–255 Lets the printer automaticall…

21, Lexmark C520 Menu Groups 21 Using printer menus Collation Keeps the pages of a print job stacked in sequence when printing multiple copies of the job. On Prints entire job the number of times specified by the Copies menu item. For example, if Copies is set to 2, and three pages are sent to prin…

49, Understanding printer messages 49 Understanding printer messages 56 Standard USB port disabled • Press until Continue appears, and then press to clear the message. The printer discards any data received through the USB port. • Make sure the USB Buffer menu item is not set t…

9, Menu Groups 9 Using printer menus Paper Menu Use the Paper Menu to define settings relating to media. Default Source Use this menu item to define the default media source. Menu item Purpose Values Default Source Identifies the default media source. Tray <x> If the same size and t…