Lexmark E250d Instructions Manual

1, LEXMARK ® E250/350/450 DRUM UNIT REMANUFACTURING INSTRUCTIONS DRUM UNIT LEXMARK E450 LASER PRINTER 3232 West El Segundo Blvd., Los Angeles, California 90250 USA • Ph +1 310 280 9620 • Fx +1 310 838 7294 • [email protected] • www.uninetimaging.com © 2008 UniNet Imaging I…

2, UNINET IMAGING INC. • BROTHER 1240/1650 • ASSEMBLING THE TONER CARTRIDGEUNINET IMAGING INC. • BROTHER 1240/1650 • DISASSEMBLING THE TONER CARTRIDGE LEXMARK E 250/350/450 DRUM UNIT REMANUFACTURING INSTRUCTIONS REMANUFACTURING THE LEXMARK E250/350/450 DRUM UNIT By Mike Josiah 3232 …

3, 3. Carefully remove the drum. 4. Carefully lift out the PCR. The PCR holders will most likely come out with the PCR. This is OK. It makes it easier to re- install it later. Be very careful not to touch the roller with your skin. As with any PCR, the oils naturally present in your …

4, Lexmark E250d 7. Install a new wiper blade coated with your preferred lubri- cant and two screws. 8. Clean the PCR holders with 99%pure isopropyl alcohol. Snap on to the ends of the PCR. 9. Install the PCR and holders. 10. With the waste chamber facing you, install the drum so that the large gear is on th…

5, 11. Install the drum axle from the large gear side. 12. Install the E-ring on to the axle. 13. Just to make sure that everything is meshing properly and lubricated properly, rotate the drum by the large gear in the proper direction. This is always a good idea for drum units as a final ch…

6, UNINET IMAGING INC. • BROTHER 1240/1650 • ASSEMBLING THE TONER CARTRIDGEUNINET IMAGING INC. • BROTHER 1240/1650 • DISASSEMBLING THE TONER CARTRIDGE LEXMARK E 250/350/450 DRUM UNIT REMANUFACTURING INSTRUCTIONS 3232 West El Segundo Blvd., Los Angeles, California 90250 USA • Ph +1 31…