Mach CN7 Operation & User’s Manual

26, SPECIFICATIONS Power rating IEC268: 300 watt Power rating peak: 1200 watt Sensitivity 1w/1m: 96dB (avg.) Max SPL, calculated long term: 121dB Max SPL, peak: 127 dB Frequency range +/-3dB: 80 Hz - 20 kHz Dispersion angle avg: H 90 x V 60 degrees Nominal impedance: 8 ohm Recommended ampl…

32, CI range overview A perfect complement to the C-range in most retail and club environments is the Mach CI series. All Mach CI in-ll speakers have wide, even dispersion that ensures good coverage in low ceiling applications. Specications: Power rating IEC258 50 watt Power …

10, To mount a CN or CM cabinet on a wall please use the following procedure 1. Find the correct position on the wall and mark where the base of the bracket should be positioned 2. Take the bracket and hold the base at to the wall at the marked position. 3. Mark each hole with a marki…

28, Warranty For information on the warranty conditions specic for your country please refer to the material handed to you by your local Mach distributor. Declaration of conformity Manufacturer: MACH Speaker A/S Perspektivvej 2 9900 Frederikshavn Denmark We, MACH Speakers A/S,…

2, Please read this manual carefully before attempting to install the product Every effort has been taken to ensure that these instructions are correct. Mach Speakers A/S does not accept any liability for loss or damage caused or alleged to be caused directly or indirectly by …

15, Mach CN7 Connecting to amplier The way you connect your C-range speakers to your amplier depends on the type of installation that you are making and the type of amplier used. Cables To get the best possible performance from your C-range speaker, use high quality cable. Cables with high capaci…