MINOURA W-300 Instruction Manual

1, - 1 - WORK STAND W-300 INSTRUCTION MANUAL Please read this instructions carefully before use. Thank you for purchasing Minoura “ W-300W-300 W-300W-300 W-300” bike repair stand. W-300 has foldable leg mechanism so you can save the storage space when you don’t use this stand. Also the clamp jaw…

2, - 2 - ! ! ! HOW TO SET-UP YOUR W-300 1 Place the Lower Frame on the level floor and fully open the Leg. Attach the Plate Leg onto the bottom of the Lower Frame and secure it with supplied Knob Bolt. (see Fig. A & B) (Fig. A) Be careful not to pinch your finger when you open the leg. (Fig…

3, - 3 - ! ! ! The Tool Tray is made of steel plate, so you may be in- jured if you scratch the edge of the plate with your finger. Be careful. (see Fig. I) ! ! If the pedal or something hits the tray during crank rota- tion, move the tray to be behind so its behind the stand frame. 4 Insert the Up…

4, - 4 - ! Do NOT adjust the knob AFTER shutting the jaws be- cause this operation will NOT securely hold your bike! Adjust first, then shut the jaws. TO ROTATE THE JAWS Push down the Gear Lever to unlock the clamp jaws, then grab and rotate the jaws. HOW TO REPLACE THE CLAMP RUBBER ! HOW TO USE THE…

5, - 5 - 2 (Fig. N) Remove and replace the clamp rubber. (see Fig. N) 3 Push the E-rings onto the rubber projections and finish the installing new clmap rubber. (see. Fig. O) (Fig. O) IF THE CLAMP LEVER HAS COMPLETELY FALLEN OFF... (Fig. P) (Fig. Q) (Fig. R) (Fig. S) 1 Once you had removed the thread …

6, MINOURA W-300 - 6 - MADE IN JAPAN Copyright ©2001 MINOURA CO.,LTD. MINOURA JAPAN HEAD OFFICEMINOURA JAPAN HEAD OFFICE MINOURA JAPAN HEAD OFFICEMINOURA JAPAN HEAD OFFICE MINOURA JAPAN HEAD OFFICE 1197-1 Godo, Anpachi, Gifu 503-2305 JAPAN Phone (+81) 584-27-3131 / Fax (+81) 584-27-4258 Email : minoura@minour…