Network Technologies Console Switch Installation And Operation Manual

28, Network Technologies Console Switch NTI SERIMUX SERIES CONSOLE SWITCH 24 ¾ Verbose mode Send or type in: [V] [Enter] The answer will be: OK [CR][LF] and the Terse mode will be terminated. The “Accessible host list” or the “User main menu” will be displayed. Note: Once a user configured for Terse mode l…

15, NTI SERIMUX SERIES CONSOLE SWITCH 11 Port serial settings From the "Port settings" menu, press [5] to display the "Port serial settings" menu. Using this menu, the administrator can adjust the serial settings of each port, or copy the current port seria…

30, NTI SERIMUX SERIES CONSOLE SWITCH 26 ¾ Login user to a port and connect the user port to a host port Action (from Keypad) Reaction of SERIMUX 1. Press USER - The LED “User” will illuminate. - The port 0 LED will be illuminated, the other port LEDs will be OFF. 2. …

34, NTI SERIMUX SERIES CONSOLE SWITCH 30 INTERCONNECTION CABLE WIRING METHOD The cable connecting the terminals and devices to the SERIMUX must be terminated with RJ45 connectors and must be wired according to the EIA/TIA 568 B industry standard. Wiring is as per the table and drawin…

2, i MAN075 Rev 1/11/07 TRADEMARK SERIMUX is a registered trademark of Network Technologies Inc in the U.S. and other countries. COPYRIGHT Copyright © 2004-2007 by Network Technologies Inc. All rights reserved. No part of this publication may be reproduced, s…

1, MAN075 Rev 1/11/ 07 Console Switch Installation and Operation Manual SERIMUX ® Series NETWORK TECHNOLOGIES INCORPORATED Tel:330-562-7070 Fax:330-56…