Newcon Optik LRM 2000PRO Operation Manual

3, Newcon Optik LRM 2000PRO 9. CUSTOMER SUPPORT Should you experience any difficulties with your Newcon OPTIK product, consult the enclosed manual. If the problem remains unresolved, contact our customer support department at (416) 663- 6963 or Toll free at 1-877-398-6666. Our operating hours are 9…

2, IMPORTANT INFORMATION Read prior to activation You have just purchased a complicated electronic device. To operate it properly, please read this manual carefully. Here are some common precautions that must be noted. • NEVER subject the unit to impact while operating or being tr…

1, Newcon International ltd. © 2005 Printed in Canada Operation Manual LRM 2000PRO LASER RANGE FINDER MONOCULAR In USA: 3310 Prospect Ave. Cleveland, OH 44115 In Canada: 105 Sparks Ave., Toronto, ON…

7, Made in Canada Newcon Optik Patent pending primary 9-volt battery drops below 7.2 volt. At this point the System is still functional but the battery should be replaced as soon as possible. The System can operate at the voltage level above 7 volt. The System remains in the active displaying sta…

9, 5.4. Additional display information The System operates in the setting Modes that are displayed as follows (refer to Fig.3): Y/M – units of measurement: yards or meters (3). KMH/MPH – units of speed measurement: km/hour or miles/hour (3). ° - units of angular measure…

10, 5.1. Preparing the device for operation. • Unscrew the screw (10) and open battery compartment cover (9) (Fig. 2). • Insert one 9V battery (sold separately) into the battery compartment observing correct polarity. • Close the battery compartment cover (9) tighten screw (10). A…