Oce CS 5050 Operation & User’s Manual

69, Printing with HP-GL/2 69 Nesting The "Nesting" function can save media by printing multiple prints across the horizontal width of the media. It also reduces the time required to print multiple prints. When you enable this function, the printer accumulates HP-GL/2 files in a …

29, Getting started 29 2 Obtain the Océ CS 5050/5070 Prime tool. 3 Prime each tubing/chain ink line by inserting the cartridge needle into the end of the Prime tool and pressing the button several times until a solid stream of ink is present throughout the tubing. [10] Inserting the ne…

47, Oce CS 5050 Printing options 47 Selecting resolution (dpi) Select your image resolution based on the viewing distance and user specifications. This resolution is not the same resolution as in the resulting rasterised file created with OGSL. For best results, make sure that the printer resolut…

75, Printer maintenance and storage 75 Installing new cartridges Be sure the new cartridges you install contain the same type of ink as the reservoirs. Snap them into place and attach the quick-connect fittings. Each time you place new ink cartridges in the printer, prime and calibrate them to get the…

90, 90 Océ CS 5050/5070 User Manual Error handling In case of an error, the control panel displays the 'Internal ERROR: Shutdown' message, followed by a specific message that explains the nature of the error. If you cannot clear it, note the message and the sequence of ev…

65, 65 Océ CS 5050/5070 User Manual Chapter 4 Printing with HP-GL/2 This section explains the printing parameters generally used with vector-based files, such as palette selection, printer control, rotation, reprints, nesting, and ink limit. Note: HP-GL/2 and HP RTL are trademarks o…