Olivetti d-Copia 52 Operation Manual

21, BASIC OPERATION 1. Turn the main switch ON ( ❘ ). ● Basic copying procedure 1 2. Warm-up At the end of warm-up, "READY TO COPY." will be displayed. * Set originals and press the Start key while the copier is still warming up. Copying will begin as soon as warm-up finished. * W…

23, Olivetti d-Copia 52 (1) Enlargement/reduction 1 Auto magnification selection mode Enlargement/reduction is executed automatically according to the paper size set. 1. Set the original(s). The size of the original will be automatically sensed and displayed as the paper size. 19 FUNCTIONS 2. Set the paper siz…

79, % DRAWER FOR INSERT SHEET 1. Touch the "CHANGE" key for the "DRAWER FOR INSERT SHEETS". 2. Select the drawer or stack bypass tray to set the insert sheets. The display will return to the copy default setting screen. ^ DRAWER FOR COVER SHEET/STITCH. 1. Touch the "CHANGE&quo…

42, 38 FUNCTIONS 5. Press the Start key. * If originals are set in the DF, all originals are read one by one and copying are performed. Go to step 7. * If an original is set on the platen, go to next step. 6. When scanning of the image overlay original has been finished, replace it wit…

109, CAUTION! The power plug is the main isolation device! Other switches on the equipment are only functional switches and are not suitable for isolating the equipment from the power source. VORSICHT! Der Netzstecker ist die Hauptisoliervorrichtung! Die anderen Schalter auf dem Gerät sind nur Funktions…

47, 4. Select the type of originals. "DUPLEX" or "1-SIDED" can be selected. 43 FUNCTIONS 5. Select the binding orientation by touching the "LEFT" key or the "RIGHT" key. The finishing setting screen will appear. 6. Set the number of copies by touching th…