Olivetti d-Copia 16W Operation Manual

37, 33 4 CUSTOMISING SETTINGS (User programs) The user programs allow you to customise the machine to match your needs. USER PROGRAMS Program number Program name Setting codes (factory default setting appears in bold) Explanation 1 Auto clear time 1: OFF 2: 10 sec. 3: 20 sec. 4: 60 sec. 5: 90 s…

67, 63 6. Limited Warranty on Media. OLIVETTI warrants the disks on which the Software is recorded to be free from defects in materials and workmanship under normal use for a period of ninety (90) days from the date of purchase as evidenced by a copy of the receipt. The entire liability of OLIV…

38, 34 USER SETTINGS * 3 d-Copia 16W is as follows: 1: Paper tray (factory default), 5: Bypass tray 23 Resolution in Auto/Text mode 1: 300 dpi 2: 600 dpi • This setting is used to change the copy resolution in AUTO and TEXT mode from 600 x 300 dpi to 600 x 600 dpi (high-quality mode). Sc…

13, Olivetti d-Copia 16W 9 BEFORE USING THE MACHINE 1 Parallel connector Connect to your computer to use the printer function. (Software Setup Guide) Document feeder tray (when the SPF is installed) Place the original(s) that you wish to scan face up here. Holds up to 40 originals. Original guides (when the SPF…

45, 41 TROUBLESHOOTING 5 MACHINE/COPYING PROBLEMS The following problems are related to the general operation of the machine and copying. Problem Cause and solution Page The machine does not operate. The machine is not plugged into a power outlet. → Plug the machine into a grounded outlet. – Power s…

40, 36 SETTINGS FOR AUDITING MODE AUDITING MODE When "Auditing mode" is enabled, a count is kept of the number of copies made by each account (up to 20 accounts can be established), and the counts can be displayed and totalled as necessary. In "Auditing mode", the display …