Supero H8DA8-2 Operation & User’s Manual

49, Chapter 2: Installation 2-29 Figure 2-5. SATA RAID Utility: Main Screen Figure 2-6. SATA RAID Utility: Array List …

53, 3-3 Chapter 3: Troubleshooting 3. If you still cannot resolve the problem, include the following information when contacting us for technical support:  Serverboard model and PCB revision number  BIOS release date/version (this can be seen on the initial display when your s…

81, B-7 Appendix B: BIOS POST Checkpoint Codes Checkpoint Code Description A9h Returned from adaptor ROM at E000h control. Performing any initialization required after the E000 option ROM had control next. Aah Initialization after E000 option ROM control has completed. Displaying the …

47, Chapter 2: Installation 2-27 2-10 Enabling SATA RAID Serial ATA (SATA) Serial ATA (SATA) is a physical storage interface that employs a single cable with a minimum of four wires to create a point-to-point connection between devices. This connection is a serial link. The serial cables used in…

34, 2-14 H8DA8-2/H8DAE-2 User's Manual Wake-On-LAN The Wake-On-LAN header is desig- nated JWOL. See the table on the right for pin defi nitions. You must have a LAN card with a Wake-On-LAN connector and cable to use the Wake- On-LAN feature. (Note: Wake-On-LAN from S3, S4, S5 are…

71, Supero H8DA8-2 Chapter 4: BIOS 4-17  CD/DVD Drives This feature allows the user to specify the Boot sequence from available CD/DVD drives. 4-5 Security Menu AMI BIOS provides a Supervisor and a User password. If you use both passwords, the Supervisor password must be set fi rst. Change Supervi…