Abocom MH350 Operation & User’s Manual

107, 107 Chapter 10 Virtual Server Virtual Server The real IP address provided from ISP is always not enough for all the users when the system manager applies the network connection from ISP. Generally speaking, in order to allocate enough IP addresses for all computers, an enterprise assign…

42, Abocom MH350 WAN Setting WAN Interface Address STEP 1﹒Select WAN in Interface and click Modify in WAN1 Interface. The setting of WAN2 Interface is almost the same as WAN1. The difference is that WAN2 has a selection of Disable. The System Administrator can close WAN2 Interface by this sel…

164, 164 We set up six Policy examples in this chapter: No. Suitable Situation Example Page Ex1 Outgoing Set up the policy that can monitor the internal users. (Take Logging, Statistics, Alarm Threshold for example) 163 Ex2 Outgoing Forbid the users to access to specific…

44, 44 STEP 3﹒Select the Connecting way:  PPPoE (ADSL User) (Figure3-5): 1. Select PPPoE 2. Enter User Name as an account 3. Enter Password as the password 4. Select Dynamic or Fixed in IP Address provided by ISP. If you select Fixed, please enter IP Address, Netmask, and Default Gate…

225, STEP 2﹒Enter Inbound in Accounting Report and select Top Services to inquire the statistics website of Send/Receive packets, Downstream/Upstream, First packet/Last packet/Duration and the service from the WAN Server to pass the MH350. (Figure19-7)  TOP：Select the data y…

233, 233 Chapter 18 Status Status The users can know the connection status in Status. For example: LAN IP, WAN IP, Subnet Netmask, Default Gateway, DNS Server Connection, and its IP…etc.  Interface: Display all of the current Interface status of the MH350  Authentication: The A…