Belson MOBILE-II Manual, Instruction Sheet

8, 6 VI LEAK CHECK BEFORE LIGHTING YOUR GRILL: Turn your L.P. gas supply on and test all fittings for leaks, before attempting to light grill, be certain all control valves are in the 'OFF' position. Slowly turn the gas supply on (leaving control valves in the '…

22, www.belson.com 20 XVII TROUBLE SHOOTING 1. PROBLEM: Burner flame does not extend full length of burner. CAUSE: Burner holes are plugged or restricted with dirt and grease. SOLUTION: Remove foreign matter from burner holes. 2. PROBLEM: Yellow flame -- low he…

17, 15 XIII ASSEMBLY DIAGRAM PG-2460-AI, ALL TRAILER ADAPTER (SECTION A) TRAILER ASSEBMLY www.belson.com …

5, www.belson.com 3 III SAFETY PRACTICES TO AVOID PERSONAL INJURY -Don'ts- DON’T move your grill while it is in operation or still hot. DON'T use an open flame when testing for gas leaks. DON'T use charcoal briquettes, wood chips or any flammabl…

11, Belson MOBILE-II 9 FLAME ADJUSTMENT Each grill burner is tested and adjusted at the factory prior to shipment; however, variations in the local gas supply or a conversion from one gas to another may make it necessary to adjust the burners. Flames should be blue and stable with no yellow tips, exc…