Freescale Semiconductor FRDM-KE06 Operation & User’s Manual

14, Freescale Semiconductor FRDM-KE06 Document Number: FRDMKE06UG Rev. 0 03/2014 Information in this document is provided solely to enable system and software implementers to use Freescale products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits based on …

4, FRDMKE06UG, Freedom KE06 User’s Guide, Rev. 0, 03/2014 4 Freescale Semiconductor, Inc. Serial and Debug Adapter (OpenSDA) Notes: 1. J9 and J10 are not populated by default on the production version. The two pins of these headers are shorted together by 0 ohm resistor R12 and R26 o…

8, FRDMKE06UG, Freedom KE06 User’s Guide, Rev. 0, 03/2014 8 Freescale Semiconductor, Inc. Serial and Debug Adapter (OpenSDA) 3.5 Infrared port One infrared Rx port and one Tx port (as shown in the following figure) are connected to ACMP0 input pin (ACMP0_IN1) and UART0 TXD0 pin of KE…

13, FRDMKE06UG, Freedom KE06 User’s Guide, Rev. 0, 03/2014 Freescale Semiconductor, Inc. 13 Serial and Debug Adapter (OpenSDA) Figure 11. I/O headers 3.11 Arduino compatibility The I/O headers on the FRDM-KE06 are arranged to allow compatibility with peripheral boards (known as shields) th…

9, FRDMKE06UG, Freedom KE06 User’s Guide, Rev. 0, 03/2014 Freescale Semiconductor, Inc. 9 Serial and Debug Adapter (OpenSDA) Figure 7. Key buttons connection 3.7 Three-axis accelerometer A Freescale MMA8451Q low power, three-axis accelerometer is interfaced through an I 2 C bus and two GPIO …