Freescale Semiconductor Motorola MMDS0508 Operation Manual

4, Freescale Semiconductor Motorola MMDS0508 MMDS0508OM/D 4 MOTOROLA Motorola reserves the right to make changes without further notice to any products herein to improve reliability, function, or design. Motorola does not assume any liability arising out of the application or use of any product or circuit described herein; neith…

145, Command-Line Commands Command Explanations MMDS0508OM/D MOTOROLA Command-Line Commands 145 MM Memory Modify MM Where: < data > The value to be stored at the < address > argument. < terminator > The command terminator character controls the next step in the command flow. The f…

187, Command-Line Commands Command Explanations MMDS0508OM/D MOTOROLA Command-Line Commands 187 VAR Display Variable VAR The VAR command displays the specified address and its contents in the variables F8 window. If a map file has been loaded, symbols and labels from the source code can be …

131, Command-Line Commands Command Explanations MMDS0508OM/D MOTOROLA Command-Line Commands 131 H Set/Clear H Bit H The H command sets the H bit of the condition code register (CCR) to the specified value. NOTE: The CCR bit designators are at the lower right of the CPU window. The CCR patter…

128, Command-Line Commands MMDS0508OM/D 128 Command-Line Commands MOTOROLA GETBSA Upload Trace Buffer GETBSA The GETBSA command uploads the contents of the bus state analyzer trace buffer to the host computer. This is convenient when using a script file in conjunction with the bus state analyze…

203, S-Record Information S-Record Example MMDS0508OM/D MOTOROLA S-Record Information 203 The first S1 record is explained in Table 17. The 16 character pairs shown in the code/data field of Table 17 are the ASCII bytes of the actual program. The second and third S1 code/data records each…