Marathon Power Athlon SEries Operation & User’s Manual

10, 3. Functionality – Rear Views 700 / 1000 / 1500VA TOWER MODELS 2000 / 3000VA TOWER MODELS 2000 / 3000VA RM MODELS 1000 / 1500VA RM MODELS 3.15 3.20 3.18 3.16 3.21 3.18 3.15 3.14 3.19 3.17 3.21 3.18 3.173.20 3.16 3.21 3.14 3.19 6 1. I…

16, 5. Operation 5.1 Turn-ON With the UPS connected to an A/C power source, press the ON/TEST button more than 2 seconds to energize the UPS. It will perform a self-test each time it is switched ON. Where applicable verify the circuit breaker on rear panel is ON. NOTE: When switched OFF, the …

24, Marathon Power Athlon SEries 120V Tower Models Capacity 700VA / 490 W 1000VA / 700W 1500VA / 1050W 2000VA / 1400W 3000VA / 2100W Input Connection Fixed power cord Hardwire Terminals Output Connection 4 x NEMA 5-15R …

12, 4.32 Hardwired models The terminal block is used to “hardwire” the UPS, thus allowing connection of input/output wiring. Use #8 AWG wire (Twisted wire cable) for possible 3/4” conduit use and terminate each wire with appropriate size/rating terminal lugs. Input/Output wires should be secured w…

15, Unit Stack Installation The following diagrams illustrate how to stack the units (and battery packs when applicable): Stacking Units 11 …

6, EMC Statements FCC Part 15 NOTICE: Pursuant to section 15 of the FCC rules, this product has been tested and thereby complies with the conditions of a Class B (700-2000VA) and Class A (3000VA) digital device, which have been established for offering sufficient protection against dangerous …