CellarCool Ultimate FM 8000 Owner's Manual

25, www.whisperkool.com | Page 23 Initial Start-Up: When power is applied to the unit, the control will briey display all symbols, and the Compressor symbol will be displayed (if unit is calling for cooling). There may be a brief delay prior to the evaporator and condenser fans turn…

13, www.whisperkool.com | Page 11 TEST THE UNIT PRIOR TO INSTALLATION To prepare it for testing before installation in wall: • Unit needs to be in the upright position for 24 hours before starting. • Remove unit from box • Plug in unit to electrical outlet • Turn on to test …

6, CellarCool Ultimate FM 8000 UFM 070313 Page 4 | 1-800-343-9463 Your fan speed selection will depend on the amount of heat that needs to be removed from the cellar. Fan speed selection will depend on the cellar size, insulation factor, door seal and desired wine temperature. When initially installing the unit,…

35, www.whisperkool.com | Page 33 1. warranty. 2. Proof of purchase of the Product in the form of a bill of sale, receipted invoice or serial number, which is evidence that the Product is within the Limited Warranty Period, must be presented by the End User to CellarCool in order to …

14, UFM 070313 Page 12 | 1-800-343-9463 Locate the desired installation location. Using a stud nder, locate the studs on either side. Place the unit against the wall to determine the height of the Intake Plenum on the rear of the Cooling Unit. Using a level and a pencil, make an outline of a 12 1…