AGFA 307 Owner's Manual

51, Self-Timer The self-timer will delay release of the shutter for approximately ten seconds after you press the shutter release button, giving you time to get into the picture. 1. Press the self timer button. Self-timer indicator will appear on the data panel. Pressing the self-tim…

49, M MODE: Manual Exposure In M mode, you have full control of the exposure. You select both the shutter speed and the aperture. The data panel will tell you if the exposure you have selected is over, under, or the same as the metered exposure. 1. Set the command switch to ASM. 2. While pr…

65, AGFA 307 Exposure Warnings Appendix Exposure Warnings  P A S Mode Display  Cause Action  Required aperture is beyond the range of the lens Required shutter speed is beyond the range of the camera Light level is beyond the range of the available shutter speeds and apertures I…

67, Remove card, then re-insert until it stops. Flash fires when the shutter-release is pressed partway down • The AF illuminator is on. This is a normal camera operation. Flash picture is too dark • Subject is beyond the flash range. Make sure the subject is within the flash range. • Fl…

73, 11. Restart your computer system. Windows 95 automatically detects the host adapter and installs the necessary software for it. (insert the Win95 CD in your CD Rom reader if the installer asks for it !) For Windows 3.xx you have to install the Adaptec EZ-SCSI Lite software which is available…