iPECS -LIK Installer's Manual

10, RSGM Installer Guide 7 The RSGM has two (2) switches on the rear panel. One is the “MODE” switch, which has four (4) contact positions, and the other is the “LAN POWER” switch, which has a single contact position. The “MODE” switch is used to control several options of t…

1, iPECS -LIK iPECS−LIK RSGM Installer Guide Please read this manual carefully before operating System. Retain it for future reference …

20, RSGM Installer Guide 17 5. iPECS Admin Programming for RSGM In this section, several host system Admin Programs specific to the RSGM are introduced. For detailed information about the iPECS Admin Programming, please refer to “iPECS Administration and Programming Ma…

43, RSGM Installer Guide 40 7. Troubleshooting Guide Table 7-1 Troubleshooting Guide Problem Reason Solution LED of LAN jack is not operated LAN cable connection is physically failed Check cable connection. iPECS Phone power is off LAN POWER switch is off Sw…

29, RSGM Installer Guide 26 Selecting DiffServ from the top menu bar returns the DiffServ settings page Figure 6.2-6. If changes are made, select the “Save DiffServ Settings” button to store the changes. Figure 6.2-6 DiffServ Configuration ISPs that support DiffServ (Differentiated …

23, RSGM Installer Guide 20 6.1.2 LAN Port Related Settings The RSGM LAN ports can be used to connect a local PC and iPECS Phone. No configuration of the iPECS Phone is required as it is configured automatically in ‘Plug-and-Play’ mode as with other iPECS local devices. …