DFI CM33-TC Operation & User’s Manual

40, 40 Hardware Installation 2.7.12 Game/MIDI Port The Game/MIDI port is identical to that of a standard PC game adapter or game I/O port. Connect an analog joystick to the 15-pin D-sub connector (J10 - Gold) located at the ATX double deck ports of the system board. This port w…

46, 46 Hardware Installation 2.7.17 DIMM and PCI Standby Power LEDs DIMM Standby Power LED This LED will turn red when the systems power is on or when it is in the Suspend state (Power On Suspend or Suspend to RAM). It will not light when the system is in the Soft-Off state. PCI St…

91, ) Using the Suspend to RAM Function 91 7. Boot Windows ® 98. In the Windows ® 98 desktop, click the Start button. Move the cursor to Settings, then click Control Panel. To check whether ACPI was properly installed, double-click the System icon. In the System Properties di…

31, Hardware Installation 31 Adding a Second IDE Disk Drive When using two IDE drives, one must be set as the master and the other as the slave. Follow the instructions provided by the drive manufacturer for setting the jumpers and/or switches on the drives. The system board…

25, Hardware Installation 25 2.7 Ports and Connectors 2.7.1 Serial Ports The built-in serial ports are RS-232C asynchronous communication ports with 16C550A-compatible UARTs that can be used with modems, serial printers, remote display terminals, and other serial d…

17, DFI CM33-TC Hardware Installation 17 2.2 System Memory Warning: Electrostatic discharge (ESD) can damage your system board, processor, disk drives, add-in boards, and other components. Perform the upgrade instruction procedures described at an ESD workstation only. …