Comm-Tec ecoHD II Operation & User’s Manual

5, 5 of 35 2. Hardware  Power Switch: Toggle between main power on & off.  DC Input: For the power adapter. (DC 12V / 1.5A)  IR Input: Connects to PIR Sensor (optional) or IR Cable (optional).  VGA Output: Connects to devices that support VGA input. (LCD projector)  HDMI Out…

16, Comm-Tec ecoHD II 16 of 35  Export Setting File: Press the “Enter” button to export the configuration value to the CF card. Step1: Copy the file “HDPlayerSetting.txt” on CF card to your PC. Use the “Wordpad” to open the file, and you can see all the configuration value of ecoHD II. Step2: You c…

19, 19 of 35 5.1.1 Using the Remote Control When Media File Is Playing  SETUP: Press the button to adjust the brightness, contrast or saturation while the movie or picture is playing. With the “+ VOLUME –” button. - First Press: Adjust the brightness. - Second Press: Adjust the contrast. - Thi…

13, 13 of 35 NOTE: GMT and applied regions Time Zone Region Time Zone Region (GMT-12:00) Eniwetok, Quazalen (GMT+02:00) Helsinki, Riga, Tallinn (GMT-11:00) Midway, Ireland, Samoa (GMT+03:00) Nairobi (GMT-10:00) Hawaii (GMT+03:00) Moscow, Saint Petersburg, Volgograd (GMT-09:00) Alaska (GMT+03:00) Baghd…

7, 7 of 35 3. Getting started  Power On  Insert the CF memory card that has Picture, Music, Movie or WMV9 files.  Press the “POWER” button to power on the ecoHD II, and then press the “TV MODE” button to select the output mode.  Status After Power On  Status 1: If the �…

11, 11 of 35 NOTE: When use ecoHD II under a DHCP-enabled network, user sometimes does not know which IP address is assigned to ecoHD II. User could also use this tool as a “Finder”, for locating the IP address of ecoHD II. By pressing the “Connect” button, IE browser will show up …