Compak F10 Conic OD Instruction Manual

13, 12 ORIGINAL INSTRUCTIONS | Ref. quality process 002/03 | v. 14/04/2014 | K06315 TIP: Our grinders are delivered to an estimated calibration of Espresso grind, been able to adjust this functionality depending on the type of coffee, type of roast and dosage used. F8 OD …

5, 4 ORIGINAL INSTRUCTIONS | Ref. quality process 002/03 | v. 14/04/2014 | K06315 3. INSTRUCTIONS 3.1. This manual is designed to provide the necessary information to correctly install, use and maintain the grinder, as well as to highlight precautions for users to keep in mind. To …

19, 18 ORIGINAL INSTRUCTIONS | Ref. quality process 002/03 | v. 14/04/2014 | K06315 11. CLEANING 11.1. General cleaning To ensure that the grinder functions properly, and produces the highest quality grind possible, the parts that come into contact with coffee should cleaned periodically. …

17, 16 ORIGINAL INSTRUCTIONS | Ref. quality process 002/03 | v. 14/04/2014 | K06315 10. CONFIGURATION There are two distinct conguration differences which are as follows: • Conguration of time for a single or double dose. Procedure to follow by the operator that can be realized at a…

16, 15 K06315 | v. 14/04/2014 | Ref. quality process 002/03 | ORIGINAL INSTRUCTIONS 9.6. Press 9.6.1. Static press Position the portalter below the tamper ( ) and push up to tamp the ground coffee (Fig. 5). 9.6.2 Dynamometric press DYN (optional) Position the portalter in the fork, regula…

3, Compak F10 Conic OD 2 ORIGINAL INSTRUCTIONS | Ref. quality process 002/03 | v. 14/04/2014 | K06315 1. SAFETY MEASURES NOTE: The manufacturer will not be held responsible for any damages resulting from improper use of the equipment, or for not following the safety measures as outlined below. Safety measures i…