Nexcom PEAK 7220VL2G Operation & User’s Manual

25, 3.3 Changing CPU To change the CPU: 1. Pull the handling bar of the socket upward to the other end to loosen the socket’s openings. Carefully lift the existing CPU up to remove it from the socket. 2. Place the new CPU on the middle of the socket, orienting its beveled corner to line …

57, Step 5.3.4 Click OK to continue 56 Step 5.3.5 Click NEXT to continue. Step 5.3.6 Click NEXT after accepting the license agreement. …

49, 4.12 Load Fail-Safe Defaults This option opens a dialog box that lets you install fail-safe defaults for all appropri- ate items in the whole setup utility. Use this option if you have changed your system and it does not operate correctly or does not power up. 4.13 Load Optimized Def…

58, 5.4 Installing USB After installing the LAN driver, go back to computer desktop and open My Computer. Step 5.4.1 Choose the setup type that best suits your needs and then click NEXT. Step 5.4.2 Click INSTALL to begin installation. Step 5.4.3 Click FINISH to exi…

63, GPIO User Guide Digital I/O UESD Port 801 { Input }{ Output } JP17 IN 0 IN 1 IN 2 IN 3 OUT 0 OUT 1 OUT 2 OUT 3 62 I3 …

33, Nexcom PEAK 7220VL2G 4.5 Standard CMOS Features Selecting Standard CMOS Features on the main program screen displays the following menu: IDE Devices Your computer has two IDE channels and each channel can be installed with one or two devices (Master and Slave). Use these items to configure…