Oce TCS400 Self Support Manual

7, Self support tips (GB) 7 What to do when you are not satisfied with the output quality Achieve optimal output quality Introduction The Océ TCS400 offers 2 methods to check the print quality. ■ Make a quality check print ■ Make a demo print. On the system information card on the on-line scr…

2, Oce TCS400 Copyright © 2003, Océ-Technologies B.V. Venlo, The Netherlands All rights reserved. No part of this work may be reproduced, copied, adapted, or transmitted in any form or by any means without written permission from Océ. Océ-Technologies B.V. makes no representation or warranties with…

18, 18 Océ TCS400 Self support guide Instructions for safe use Introduction Océ designed products are tested in accordance with the strictest international safety standards. It is important that you observe the safety rules included in this appendix to help assure safe working with the Océ TCS40…

21, Safety information (GB) 21 Safety data sheets Introduction The disclaimer below applies to all safety data sheets in this manual. Contact your local Océ organisation for questions about Océ products regarding health, safety and environment. You can find the address of your local Océ organisati…

8, 8 Océ TCS400 Self support guide 3 Finally, when you have defined the correct media and the correct print mode, and you are still not satisfied with the output quality, use the wizards to achieve optimal output quality. (see ‘Use the wizards to achieve optimal output quality’ on page 12). Cha…

20, 20 Océ TCS400 Self support guide General ■ Always use materials recommended by Océ and developed for the Océ TCS400. Materials not approved by Océ can cause faults in your machine. ■ Do not use the machine when it is emitting unusual sounds. Remove the plug from the power socket…