Rioworks PURCA Operation & User’s Manual

40, In Case of Problems If after making and saving system changes with Setup, you discover that your computer no longer is able to boot, the PhoenixBIOS supports an override to the CMOS setting, which resets your system to its defaults. The other way is clear the present …

27, Hardware Installation PURCA Front Panel Connector PWR_LED PW_SW SPEAKER RST SCSI_LED HDD_LED - + + - Figure 4-1 Item 4 through 10 are depicted in Figure 4-1 as above. 5. Reset Switch Header (2-pin RST) This 2-pin connector connects to the case-…

68, Chapter 3 .2 BIOS Flash Upgrade Utility Phoenix Phlash gives you the ability to update your BIOS from a floppy disk without having to install a new ROM BIOS chip. Phoenix Phlash is a utility for "flashing" (copying) a BIOS to the Flash ROM installed on your comp…

21, Hardware Installation 3. To secure CPU heatsink with the locks as the figures is shown below. 3. Plug the 3-wire fan power core into the connector named CPU FAN 1. Black- Color Wire Red- Color W…

61, Rioworks PURCA 2 - 25 Note Floppy drives are not managed on this menu as part of Removable Devices. To change a device’s priority on the list, first select it with the up-or-down arrows, and move it up or down using the <+> and <-> keys. Pressing <n> moves a device b…