Robe Robin 100 LEDBeam Operation & User’s Manual

12, 12 3.6. Wireless DMX operation The external Robe Wireless CRMX-LB100 module allows receiving wireless DMX. This device is equipped with the Lumen Radio CRMX module and antenna for receiving DMX signal. CRMX module operates on the 2.4 GHz band. Push in the 5-pin XLR plug (1) into 5-pin …

11, 11 3.5 DMX-512 connection The xture is equipped with 5-pin XLR sockets for DMX input and output. Only use a shielded twisted-pair cable designed for RS-485 and 5-pin XLR-plugs and connectors in order to connect the controller with the xture or one xture with another. DMX…

9, 9 3.4 Rigging the xture The installation of the xture has to be built and constructed in a way that it can hold 10 times the weight for 1 hour without any harming deformation. The installation must always be secured with a secondary safety attachment, e.g. an appropriate catch net.…

19, 19 5.1 Virtual colour wheel - colour mixing chart Scale* Virtual Colour Wheel Red Green Blue White DMX DMX DMX DMX DMX 1-2 (White 2700K) 250 118 0 63 3 (White 2700K /Hal.mode/) 250 118 0 63 4-5 (White 3200K) 255 141 5 89 6 (White 3200K /Hal.mode/) 255 141 5 89 7-9 (W…

27, Robe Robin 100 LEDBeam 27 6.7 Reset This option enables the Robin 100 LEDBeam to index all effects and return to their standard positions. 6.8 Special functions (Special) RDM Low - This menu item shows the rst part of the RDM identication code. RDM High - This menu item shows the second part of the RDM ide…

16, 16 Mode/Channel Value Function Type of control 1 2 3 4 5 6 - 13 10 - - - 0-255 White (8 bit) - all zones If RGBW mode is selected: White colour saturation control coarse (0-100%) If CMY mode is selected: No function proportional - 14 - - - - 0-255 White ne (16 bit) - all zones Fine whit…