Swing-N-Slide Kodiak PROJECT 512 Assembly Instructions Manual

26, 26 PROJECT 512 Fig.19 36'' 2'' x 4'' x 43'' M. Install suppor ts cont. 1. Install 2'' x 4'' as shown in (Fig 19) (3) 2-1/2'' Screws 2-1/2'' screw …

40, 40 PROJECT 512 Fig. 35 (Left Side) 2'' x 4'' x 48-5/8'' (Right Side) (Front) 2'' x 4'' x 48-5/8'' 43-5/8’’ 43-5/8’’ 42-1/8’’ 29-1/2’’ 17’’ 4-3/8’’ 2-3/4’’ 15-1/4’’ 27-7/8’’ 40-3/8’’ 40-3/8…

9, 9 PROJECT 512 Understanding how the Bracket System Works Shelf-Loc GAP Intr oduction to the Bracket system 1. ALWAYS Use 2'' lag screws on all brackets. 2. Brackets ''clip'' to each other. NEVER position in a non-interlocking position. Top of bracket Botto…

37, 37 PROJECT 512 Fig.31 (6) 5/4'' x 6'' x 36'' (5) 5/4'' x 6'' x 36'' V. Barrier Boards cont. 1. Install 5/4'' and 2'' x 4'' barrier boards as shown in (Fig. 31) and (Fig. 32). (2) 2'&apos…

12, 12 PROJECT 512 2'' Lag screw Frame 3 Frame 3 C. Frame 3 Construction 1. Measure and position brackets on 4'' x 4'' x 120’’ as shown in (Fig.3). 2. Attach upper 2'' x 4'' and lower 5/4'' boards as shown in (Fig. 3) Note…

21, Swing-N-Slide Kodiak PROJECT 512 21 PROJECT 512 Fig.13 2'' x 4'' x 56'' 2'' x 4'' x 96'' J. Install Upper Rail Boards 1. Install upper 2’’ x 4’’ rail boards as shown in (Fig 13). Flush with the top of 4’’ x 4’’ deck supports. (3) 2-1/2'&…