909 CD18 series Instruction Manual

3, 3 Description of symbols The rating plate on your tool may show symbols. These represent important information about the product or instructions on its use. Wear hearing protection. Wear eye protection. Wear breathing protection. Double insulated for additional protection. Conforms to r…

2, 2 CONTENTS Warranty Power Tools For full details please visit us at www.909.com Warranty 2 Description of symbols 3 Specifications 4 General safety rules 5 Additional safety instructions for drills 6 Additional safety instructions for the charger 7 Additional safety instructions relate…

6, 6 4) Power tool use and care a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. b) Do not use the power tool if the switch does not turn it on and off. Any power too…

18, 18 Drilling Drilling metals • Always clamp sheet metal. • Support thin metal with a block of wood to avoid distorting it. • Use a punch to mark the centre of the hole. • Use a suitable lubricant for the material you are working on, USE: FOR: Oil Steel Turpentine or paraffin Al…

7, 909 CD18 series 7 • Do not put pressure on the drill, such that it slows the motor down. Allow the drill bit to cut without pressure. You will get better results and you will be taking better care of your tool. • Keep the area free of tripping hazards. • Do not let anyone under 18 years operate…