Adaptec Serial Attached SCSI (SAS) Expander Card Installation And User Manual

20, • Connect SAS HD cables between the expander card and internal disk drives: 7. Close your computer cabinet, reconnect the power cord and network cables, then power up the system. 20Proprietary and Condential to PMC-Sierra, Inc. Document No.: CDP-00301-01-A Rev A, Issue Serial Attached SCSI (SAS…

17, 2. Attach the low-prole bracket to the expander card. The low-prole bracket is installed on the back side of the expander, with the mounting screws inserted from the front, as shown the Figure 3. Insert the screws through the holes on the front of the expander, then fasten the screw…

9, This equipment is home use (Class B) electromagnetic wave suitability equipment and to be used mainly at home and it can be used in all areas. 9Proprietary and Condential to PMC-Sierra, Inc. Document No.: CDP-00301-01-A Rev A, Issue Serial Attached SCSI (SAS) Expander Card Installatio…

19, Installing the SAS Expander Card Follow the steps below to install your SAS Expander Card card and connect your internal or external storage devices. Caution: Be sure to handle the expander by its bracket or edges only. 1. Turn off the power to the system, all drives, enclosures, and sys…

15, About the Adaptec SAS Expander AEC-82885T The SAS Expander Card AEC-82885T is a expander card with these features: 2 external mini-SAS HD connectors 0 4 2 3 3 internal mini-SAS HD connectors 4 internal mini-SAS HD connectors 5 6 7 8 I2C for connector CN4 I2C for connector CN5 Reserved Power conne…

10, Adaptec Serial Attached SCSI (SAS) Expander Card 1 About This Guide This Installation and User's Guide explains how to install and congure your SAS Expander Card AEC-82885T in a RAID system. What You Need to Know Before You Begin You should be familiar with computer hardware, data storage, and Serial Attached SCSI (SAS) a…