Dension DEGW5-9210-7 Install Manual

1, Dension DEGW5-9210-7 INSTALL GUIDE ice4Link Gateway 500 MOST State of the art car integration for media players, USB and Bluetooth devices DEGW5-9210-7 Set the DIP switches to the following position and install the Gateway 500 as illustrated below: 2 3. Car side CDC 1a. Remove the blue locking clip fro…

2, You must set the mode selector switch to service mode/bypass, CD Changer/ position otherwise the service computer may detect an unknown device in the bre optic system which can lead to errors reported. i Service/CDC mode When servicing your vehicle Text Conguration Saab & Merc…

3, GEN: Gateway enabler tool for Gateway 500 MOST BMW User Manual v1.0 xxxxxx 1 Introduction Introduction The Dension Gateway Enabler tool (GEN tool) provides a quick and easy tool to help the installation of a respective Dension Gateway product for…

4, 3 Getting Started First install the Gateway 500 according to the installation manual. It is recommended that the installation and using the GEN tool is performed by a professional installer. Using the GEN Tool Please make sure the Gateway 500 is in Gateway mode. Turn th…

5, CD/Aux 6. Operating modes 3. Text, browsing and song information 1. Introduction 2. Car entertainment system requirements Select CD1: Playlists/Folders This is an alphabetical list of playlists (or folders) on your device. On USB devices, M3U and PLS playli…

6, 7. Source table Note: if your vehicle does not have text capability, select CD6 on the changer to access the following source modes. Track Source Description 1 Auxilliary Input Plays audio from the device connected to the Dension Gateway (GW) auxilliary input 2 iPo…