RuggedCom RUGGED VDSL RS910L Installation Manual

21, RuggedCom RUGGED VDSL RS910L 21  2007 RuggedCom Inc. All rights reserved Rev100 Table 5 - RJ45 Ethernet port pin-out NOTE: RuggedCom does not recommend the use of CAT-5 (10/100Base-TX communications) cabling of any length for critical real-time substation automation applications. However, transient suppressio…

20, 20  2007 RuggedCom Inc. All rights reserved Rev100 The unit can automatically select the best bit-rate based on current line conditions. If the line conditions degrade (reducing the SNR) but the unit is able to maintain the link, an alarm will be triggered to notify the…

3, 3  2007 RuggedCom Inc. All rights reserved Rev100 Table of Contents 1 Product Overview ............................................................................................................................... 5 1.1 Functional Overview ...............................................…

9, 9  2007 RuggedCom Inc. All rights reserved Rev100 2.2 Power Supply Wiring and Grounding 2.2.1 AC Power Supply Wiring and Grounding Figure 4 - RS910L Power Supply Inputs The RS910L AC power supply inputs should be connected as follows: 1. +/L should be connected t…

8, 8  2007 RuggedCom Inc. All rights reserved Rev100 2 Installation 2.1 Din Rail Mounting An optional DIN rail mounting bracket is available for the RS910L. The figure below details mounting instructions for the standard 1” DIN Rail. Figure 3 - RS910L DIN Rail Mounting …

10, 10  2007 RuggedCom Inc. All rights reserved Rev100 2.2.2 DC Power Supply Wiring and Grounding Figure 5 - DC Power supply wiring and grounding diagram The RS910L low voltage DC power supply features reverse polarity protection and dual independent inputs. The latter feature a…