Oce CS230 Phase 3 Operation & User’s Manual

15, CS230 (Phase 3) Contents-13 Security setting .......................................................................... 13-54 Displaying the administrator setting screen............................... 13-59 13.5 Overview of weekly timer settings.............................................. 13-…

313, Troubleshooting 6 CS230 (Phase 3) 6-25 2 Reminder If the paper is misfed as described below, contact your technical representative. The paper is wrapped around the roller in the fusing unit. The paper is folded or shredded by the roller in the fusing unit. The paper that was removed tore and pa…

638, Oce CS230 Phase 3 13 Utility 13-98 CS230 (Phase 3) 6 Touch [User Name]. The User Name screen appears. 7 Type in the user name (up to 64 characters), and then touch [OK]. – For details on typing in text, refer to “Entering text” on page 14-3. – Once a user name is registered, it cannot be changed. – …

674, 14 Appendix 14-10 CS230 (Phase 3) Punch Select the setting to punch holes in the copies for filing. R Red Set this parameter to adjust the level of red in the image, for example, if you wish to redden skin tones. S Saturation Set this parameter to adjust the degree of vividness of …

443, Application functions 9 CS230 (Phase 3) 9-61 5 Touch [OK]. 6 If necessary, specify any other copy settings. 7 Using the keypad, type in the desired number of copies. 8 Press the [Start] key. …

284, 5 Additional copy operations 5-38 CS230 (Phase 3) The Auto Reset Notification screen appears. 3 Touch the button for the desired display time. – To not display the message requesting confirmation to reset the settings in Enlarge Display mode, touch [OFF]. – To display the message …