MIMAKI JV400-SUV Series Operation Manual

114, 4-18 Replacing method of C absorber kit If ink adheres to the C absorber, it is required to replace the C absorber. Rough guide for replacement: Replace when the concavity and convexity of the surface of the absorber are filled with ink as indicated in the right photo. In addition, …

52, MIMAKI JV400-SUV Series 2-20 Set the media feeding Correct the feeding rate of media. If the correction value is not appropriate, stripes may appear on the printed image, thus resulting in a poor printing. Setting Feed Correction A pattern for media correction is printed and a media-feeding rate is correct…

61, This chapter describes the operation procedures for using the machine more conveniently and each setting procedure. List of Functions ............................................3-2 Setting Logical Seek .....................................3-3 Setting Drying Time ..................…

122, 4-26 Automatic Maintenance Function To use this machine comfortably, you can set various maintenances to be performed automatically. Here, set performing intervals of various automatic maintenances. You can prevent troubles such as ink clogging by performing automatic maintenance periodic…

58, 2-26 Manual Drying Feed When the operation is cancelled before prints are fed under UV lamps, such prints need to be dried/cured by manual feeding. 1 Press the key in LOCAL three times. 2 Press the key. 3 Press to select ON/OFF. 4 Press the key. 5 Press to select ON. 6 Press the ke…