Q-See QC Series Setup Manual

4, 6 7 1.1 CONNECTING YOUR NVR TO A NETWORK First and foremost, you will need to physically connect your NVR to a router. This router can be part of an existing network of computers, or it can be the router/modem supplied by your Internet Service Provider (ISP) to connect you to the Internet. T…

10, 18 19 STEP 5. Click on CHECK NOW to detect how many Routers are in the network. PICTURE 1-25 PICTURE 1-26 STEP 6. If there is only one router detected, and you are using UPnP, then you will need to turn off that setting and attempt to connect using DMZ as described in Section 1.2 Open…

32, 62 63 Clicking on Manual Add will open a window over the Remote Device window. Within the Manual Add window, some information may already be displayed but it may not be correct for the device you are intending to connect. You will need to enter the Internet IP address that you o…

24, 46 47 PICTURE 3-43 The areas of the PSS display screen each have their own functions: 1 4 5 6 2 3 Item # Area Function 1 Real-Time Monitor Live viewing of selected channels plus playback of recorded video. 2 Window Controls Close, minimize, lock or switch the program’s window. 3 Tool Bar Contr…

13, 24 25 FTP File Transfer Protocol (FTP) allows you to securely share, manage, and distribute files over the internet. You will need to already have a server and FTP service tool to utilize this feature on the NVR. Follow the software’s instructions to set up your service, password and FTP f…

47, Q-See QC Series 92 93 5.4 SYMBIAN The QC NVRs can be configured to be remotely monitered by a phone running the 3rd and 5th editions of the Symbian OS through the use of the DMSS software included on the disk that came with your NVR or available via download from www.Q-See.com/Support If you are dow…