Twitoplast OPAL ZC207DK Manual, Installation Instructions

1, Indication Panel Diagnostic. Power - Le LED vert est allumé quand la carte est sous tension par l'intermédiaire du transformateur. K1 - Le LED rouge est allumé quand le relai K1 is fermé. Operates the Acu. K2 - Le LED rouge est allumé quand le relai K1 is fermé. Operates the Acu. By…

2, Twitoplast Ltd. Thank you for purchasing the most advanced Zone Control systems the ZC-207 DK. ZC207DK is a dry contact controller designed to control up to 7 rooms (zones) with proportional round air Dampers + proportional By –Pass Damper , 2 Relays and communication port. The control…

3, The instructions of installation, operation and maintenance are delivered with each controller. Before installation read all the handbooks and get familiar with the elements and operations. Check that the air-conditioner which will be controlled by the controller is ready to be starte…

4, Twitoplast OPAL ZC207DK Dip Sw. Settings: Dip SW. #1 = Defines that at Channel #1 the size of the damper is doubled. Dip Sw. #2 = Define if the K1 relay will have 1 second pulse after power up or not. [For Sanyo units]. Dip Sw. #3 to #8 = Not used. ZC207DK controller: o Made engineering Plastic ABS V-0 o Voltage su…

5, By-Pass Damper The By-Pass damper will balance the air flow proportionally to the air flow demand form each room(zone). The damper will be motorized directly from the controller in the room(zone). Connect the By pass motor to the ZC207DK controller using prefabricated Red/Black cab…