Packard Bell MX Disassembly Manual

14, 1313131313 Packard Bell EasyNote MX Disassembly Manual 13 Bluetooth (Optional) To remove the optional Bluetooth module, first remove the battery (see Battery ), the HDD (see Hard Disk Drive), the CD-ROM or DVD drive (see Optical Disk Drive), the wireless network card (see WLAN Card), t…

9, 88888 Packard Bell EasyNote MX Disassembly Manual 8 4. Remove the 4 screws securing the heat sink in designated order. Fig. 9 Location of heat sink screws. 5. Remove the heat sink. 6. Turn the screw in the CPU socket 180 degrees to release the CPU. 7. Take out the CPU. Keyboard To remove the key…

17, Packard Bell MX 1616161616 Packard Bell EasyNote MX Disassembly Manual 16 5. Remove the 8 screws securing the LCD and lift out the LCD panel. Fig. 28 Location of screws securing LCD module. 6. Remove the 4 screws on each side of the bracket. 7. Remove the top support bracket (usually held in place…

6, 55555 Packard Bell EasyNote MX Disassembly Manual 5 4. Remove the 4 screws on the metal bracket to separate it from the hard disk drive. Fig. 3 Location of hard disk drive bracket screws. Optical Disk Drive To remove the CD-ROM or DVD drive, first remove the battery (see Battery ), remove t…

8, 77777 Packard Bell EasyNote MX Disassembly Manual 7 2. Release the metal clips securing the memory module(s) and remove the module(s). Fig. 7 Removing memory module. Processor To remove the CPU, first remove the battery (see Battery) and then perform the following steps: 1. Remove t…

18, 1717171717 Packard Bell EasyNote MX Disassembly Manual 17 Webcam Microphone/USB Cable To remove the webcam microphone and the webcam USB cable, first remove battery (see Battery ), the HDD (see Hard Disk Drive), the CD-ROM or DVD drive (see Optical Disk Drive), the wireless network card (see WLAN …