shelolab SMO14-2 Installation And Operation Manual

19, 19 | P a g e OPERATION (CONTINUED) SETTING THE TIMER This procedure enters a timed heating cycle into the Timer. The cycle will run the oven for a set time, at the currently programed temperature set point. The oven will stop heating once the heating cycle is finished. …

10, 10 | P a g e CONTROL PANEL (OVERVIEW) Main Temperature Control Marked SET TEMPERATURE, this control consists of a green LED numerical display and an UP / DOWN arrow pad used for inputting set point temperatures and calibration offsets. Heating Activated Light The green pilo…

16, shelolab SMO14-2 16 | P a g e OPERATION (CONTINUED) BURN IN: FIRST USE The steps below will help to eliminate smoking from the heating elements’ protective coatings. 1. If you have not already done so, turn the Over Temperature Control knob all the way clockwise to its maximum settin…

25, 25 | P a g e PARTS LIST PARTS Description Parts Number Adjustable Feet 2700506 Shelf Clip 1250512 Shelf SMO14-2 (FX14-2) and SMO28-2 (FX28-2) 995-00006 …

22, 22 | P a g e MAINTENANCE (CONTINUED) Periodically, inspect the door latch, trim, catch, and gasket for signs of deterioration. Failure to maintain the integrity of the door system shortens the life span of the Oven. Electrical components do not require maintenance. If the oven fa…

15, 15 | P a g e OPERATION OPERATING PRECAUTIONS Warning: The SMO oven is not an explosion proof unit! The oven is not designed to safely contain combustible gasses. Do not place explosive, combustible, or flammable materials into the chamber. 1. The bottom surface of the chamber should…