TTI Buddy BX5 Operation & User’s Manual

32, - 31 - “Enable”:Alarm Trigger enable on/off and alarm type, press [OK] for changing; “Level”:Choose Alarm trigger level,High/Low Level optional,press [OK] for optional; “ Delay”:When alarm trigger,if need delay alarm trigger,time can be set to reduce error alarm, press [OK] …

24, - 23 - 5.5 REC Setup Recording setup menu includes: basic setup, Main stream, Sub stream, mirror Recording, time recording, disk management(configuration and modification must select Save to take effect) 5.5.1 Basic Setup This menu is to setup the basic video, audio and video parameters and …

10, TTI Buddy BX5 - 9 - 1.4 Fron tand Back Panel 1.4.1 Fron LED Indicators 1—HDD Lock, it’s used for unload hard disk. （Device will power off automatically if power on when HDD lock is open） 2—HDD Fixed Screw . Please manually tighten screw after installing hard disk drive, to prevent HDD slip out ; 3�…

11, - 10 - 1.4.2. Back Panel IO Indicators 1— Video&Audio Input interface, 1-4Channels or 1-8Channels, with DC 12V output: 2—16 PIN Extension Port , With Video&Audio output interface、alarm input&output、serial port etc. 3—24 PIN Extension Port , With alarm input&output、serial …

48, A:1)Please set Low Sub-stream,when sub-stream set high it will effect the transmission because of the network; 2)Network environment not good; Q: Device works well in the Client, but cannot see the video a period time later. A:1.Check if connect to server successfully on device,…