EZ Lite Cruiser STANDARD MODEL Service Maintenance Manual

28, Troubleshooting Guide Common Problems & Solutions Problem Possible Reason Possible Solution Power Won’t Turn On Controller system power is not connected. Connect the Battery. Power Won’t Turn On Controller system CPU and Joy- stick are not connected. Ensure all connectio…

11, EZ Lite Cruiser STANDARD MODEL Maintenance & Replacement of Parts Arm Rest Raising Hinge Test, Tightening & Replacement Figure # 3 Figure # 4 The plastic piece underneath the arm rest acts as a hinge to allow for the raising of the arm rest. This convenient feature allows the user to enter into and exit ou…

15, Maintenance & Replacement of Parts Joystick and Fork Replacement Figure # 17 To replace the Joystick component of the controller system, disconnect the middle I/O port of the CPU component — labeled with the Power/Input — as shown in Figure 17. To dismount the joystick from the arm r…

21, Maintenance & Replacement of Parts Rear Motor Replacement Using a hex wrench, loosen the two bolts on the back side of the motor that holds it to the frame. Make sure not to lose the washers located underneath the bolts. They must be replaced. Once the two bolts are remove…

12, Maintenance & Replacement of Parts Back Support Cushion and Straps Maintenance & Replacement Figure # 7 Figure # 8 The back support cushion is held on by Velcro straps and can be removed completely as indicated in Fig- ure 7 and Figure 8, exposing the supporting straps und…