Argon 18 E-118 NEXT Assembly Manual

32, E-118 NEXT 216A: 13. Parts’ SKUs and Descriptions 31 Images are for reference only. Proportions are not accurate. 80033 38175 3823436197 36670 38977 36660 38233 36661 36658 36657 38934 80061 36659 36713 36914 (left; black) 36915 (right; silver) XS / 80071 S / 80070 M / 80069 L / …

7, 2.1 Install bearings 27 MR136 (1 ¼’’) and 26 MR122 (1 1/8’’) inside the frame after greasing the surfaces. 2.2 Install the fork by placing the lower part rst, and then balancing the upper part in its nal position. 6 E-118 NEXT 216A: 2. Fork installation 27 26 GREASE GREASE …

4, Argon 18 E-118 NEXT 9. Armrest assembly 12. Derailleur hanger adjustment10. Seatpost installation 11. Saddle adjustment 3 E-118 NEXT 216A: Assembly overview 8. Rear brake installation7. Front brake installation …

31, E-118 NEXT 216A: 12. Derailleur hanger adjustment The front derailleur hanger can be adjusted according to the front derailleur angle to get an equal curve between the derailleur and the big chain ring. Once at the right angle, use blue 242 Loctite and screw in at 6Nm. 30 6Nm LOCTITE LOC…

8, 2.3 Slightly unscrew the steering column set screw (4c) located on the fork. 2.4 Screw in the compression column (4b) (specic to the size of your frame) inside the head tube. The threads must be lightly greased until the compression column can be inserted smoothly and tightly.…

27, E-118 NEXT 216A: 9. Armrest assembly 9.1 Install the adhesive Velcro on the armrests (10&11). 9.2 Screw the armrests (10&11) into the extension bar connector bridge (13) at 5Nm in the position desired. Reverse the left and the right armrests to obtain a more forward or backward…