AGFA DRYSTAR AXYS Manual 

13, 66 2852 A EN 20070205 DRYSTAR AXYS Overview of operator functions This section focuses on the basic operating principles of the Drystar AXYS. After reading this chapter, the operator should be able to produce diagnostic usable hardcopies. No special technical skills are required. All basic operat…

20, 73 2852 A EN 20070205 DRYSTAR AXYS About Drystar AXYS consumables The Drystar AXYS can handle blue-transparent DT 2 B, clear-transparent DT 2 C (both for general radiography) and optionally the blue-transparent DT 2 Mammo (for the mammography application) films. Available film formats for general r…

10, 63 2852 A EN 20070205 DRYSTAR AXYS Switching off the Drystar AXYS When you want to switch off the printer, the printer will first finish his current print job. Queued print jobs will be stored on the hard disk and will be resumed next time the printer is switched on. Procedure: 1 Press the …

23, 76 2852 A EN 20070205 DRYSTAR AXYS Loading films This section describes how to load the Drystar AXYS with appropriate Drystar DT 2B and Drystar DT 2C films. The Drystar AXYS can be loaded with 8x10”, 10x12”, 11x14”, 14x14” and 14x17” films. The Drystar AXYS will inform you…

31, AGFA DRYSTAR AXYS 84 2852 A EN 20070205 DRYSTAR AXYS When the tray is closed, the Film Identification tag is read and the printer set- tings are automatically adjusted if the film properties have changed. The Film Identification tag is located on the protective sheet on the backside of the film pack. T…

32, 4 Advanced operation (Key-operator mode) This chapter consists of the following topics: ❑ Overview of key-operator functions ❑ Quality Control for general radiography applications (DT 2 B & DT 2 C) ❑ Quality control for mammography application (DT 2 Mammo) (optional) ❑ Preventi…