AGFA Drystar 5300 Reference Manual

68, 68 2920B EN 20031206 " If the format is changed from the previous format, the following message appears (example): You must modify the tray configuration. Refer to ‘Changing the film format of the trays’ on page 152 for more information. 6 Press the Confirm key to continue. Please…

153, 153 2920B EN 20031206 2 Place the Drystar 5300 with its input tray over the edge of the table, to facilitate access to the bottom of the tray, as illustrated below: 3 Take a cross head screwdriver and remove the 3 screws underneath the input tray, as illustrated below: …

178, AGFA Drystar 5300 178 2920B EN 20031206 6 Close the film input tray. 1 3 2 4 5 6 XX XXX X XXX X XXX X X X X X X XXX X X X X X X X X XX X X X X X X X X X X X X X X X X X X X X X X X X X X X X X XXX X X XXXX X X X X X X XX XX X X X X X X X X X …

33, 33 2920B EN 20031206 Managing the print queue You can always check the status of the print jobs. " Keep in mind that one print job can hold several films to be printed. In accordance with the acquisition modality used and with the actual settings, films can be grouped in a folder to be submitte…

135, 135 2920B EN 20031206 $ If you have selected ‘1 Enter via keypad’, the ‘Enter modality AE_Title’ screen is displayed: Enter the modality AE_Title by means of the arrow keys. Refer to ‘Data entry’ on page 27. Make sure not to enter more than 16 characters. 9 Press the Co…

134, 134 2920B EN 20031206 3 Press the Confirm key to store the data, or the Escape key to quit the procedure without any changes. The ‘Select modality brand name’ screen is displayed: 4 Press the up/down arrow keys to select the appropriate modality brand name. $ If you have selected �…