Suntek HT-001 Operation & User’s Manual

8, 8 Video Resoluation Video Length Record Audio 1080P/720P/WVGA /VGA 10/30/60/90S ON/OFF Video Mode Language Motion detection Camera/camera+video/ video 12languages High/Mid/Low TV mode PAL/NTSC Date/time YY/MM/DD No. 26letters+number Timer 00:00:00/23:59:59 Fomat Cancel /ok Password OFF/…

11, 11 5. Specification 6. Packing List Image Sensor 3 Mega Pixels Color CMOS Memory TF Card to 32GB Lens F=3.1; FOV=90 ° Size 129mmx93mmx39mm LED Black Invisible 940nm Motion Detection High/Normal/Low PIR Sensor Sight Angl…

6, 6 3. Operation 3.1 Load Battery 3.2 Insert TF Card(8MB~32GB) 3.3 Remoter The infrared remoter is an input device of the camera and primarily used for customer settings. Its maximum remote distance is 9 meters. …

4, 4 1.4 Key Features 1 30pcs IR LEDs for flash range as 20 meters 2 12MP/8MP/5 MP resolution optional 3 Color pictures during daylight; black and white at night 4 trigger time:1.1s 5 Multi-shot pictures; 1,3,6,9 6 1/5/10/30 seconds/minutes Interval between motions optional 7…

10, Suntek HT-001 10 3.4.2 ON In this mode, remoter is useless. The camera works automatically. Will capture if detected any motions by PIR. 4. Firmware Upgrade This camera is equipped with an automatic upgrade function for you. Upgrading is needed only when an improved firmware is avail…

9, 9 a. After you inserted the TF to camera, connect with the computer by USB cable, then the camera will be a removable disk. b. Open the MMSCONGIF software, you can change the Language, Working mode (Camera/Camera+Video/Video ),Resolution(12/8/5MP/1080P/720P/VGA),Multi(1/3/…